Selecting an ideal product for your requirements can be challenging, as they can vary significantly in terms of price, size, and performance. There are various kinds of 1200 watt amp that cater to different budgets and purposes, and it’s unlikely that one type will be perfect for everyone.
Nevertheless, we have done the research and narrowed down the options for you. After evaluating numerous product options, we have compiled a list of the top 1200 watt amp that is currently on the market.
Our Expert Reviews for Top 10 1200 Watt Amp
We found many reviews when researching. We have considered user feedback on the best 1200 watt amp and our suggestions include only the finest of them in this article.
Skar Audio Rp-1200.1D Monoblock Class D
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor – 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
Boss Audio Systems R6002 Riot Series
- Power – 600 Max x 2 @ 2 Ohms, 300 Max x 2 @ 4 Ohms, 1200 Max Bridged x 1 @ 4 Ohms
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Specs – Dimensions: 12.28” x 10.44” x 2.25”, Weight: 5.86 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 25 Amp ATO Blade
- Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
Planet Audio Pl1200.2 2 Channel Car
- 600 W MAX Power @ 2 Ohm x 2 Channels
- 300 W MAX Power @ 4 Ohm x 2 Channels
- 1200 W MAX Bridged Power @ 4 Ohm x 1 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Filter, Variable Bass Boost
- Remote Subwoofer Control, Blue Backlit Illumination
- Dimensions: Depth 10” x Width 7” x Height 2.4”
- 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers
Taramps Md 1200.1 1 Channel 1200
- Full-range
- Class-D amplifier
- Crossover HPF and LPF
- Frequency Response: 10Hz ~ 20KHz
- 1 channel of 1200 watts RMS @ 1 Ohms
Hifonics Zg-1200.2 Zeus Gamma Zg Series
- 1,200 watts max
- 600 watts x 2 at 2 ohms
- 300 watts x 2 at 4 ohms
- 1,200 watts x 1 at 4 ohms mono bridged
- Frequency response: 10 Hz to 22 kHz
Boss Audio Systems Ar1200.2 2 Channel
- POWER: 600 Watts Max x 2 @2-Ohms, 300 Watts Max x 2 @4-Ohms, 1200 Watts Max x 1 Bridged @4 Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- VARIABLE BASS BOOST: With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- BRIDGEABLE: Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- OTHER SPECS: Dimensions – Depth 10.2” x Width 6.5” x Height 2.8”, Weight – 4.5 lbs.
- WARRANTY: BOSS Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
Kicker 46Cxa12001 Cxa12001 1200-Watt Mono Class
- CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
- A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want – to craft the sound you love.
- Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
- CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
- These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.
Taramp’S Md 1200.1 2 Ohms 1200
- Excellent for voice as well as bass
- 2 ohms
- 1200 watts
- Mono
- Bass boost
Rockville Rvf-2 1200W Peak/300W Dyno-Certified Rms
- Rockville RVF-2 1200w Peak/300w Dyno-Certified RMS 4 Channel Car Amplifier Stereo Amp.
- 2 Ohm: 75 Watts x 4 Channel <1% THD+N. 4 Ohm: 55 Watts x 4 Channel <1% THD+N. 4 Ohms bridged: 150 Watts x 2 Channel <1% THD+N. High-Speed MOSFET Power Supply.
- Fully Adjustable 6dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz – 200Hz. High Pass Filter: 50Hz – 1.2KHz. Full IC-Controlled Protection Circuitry.
- Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB.
- Under Voltage Protection at 9V. Over Voltage Protection at 16V. Frequency Response: 20Hz – 20KHz. Damping Factor: >150 @ 100Hz. Fuse: 20A x 2. Dimensions: (L x W x H) 12.2″ x 8.5″ x 2.24″. Weight: 6.1 lbs
Hifonics Zxx-1200.1D Zeus Mono Channel Car
- CLASS D AMPLIFIER – Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
- BUILT FOR POWERFUL SOUND – Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
- MADE TO LAST – Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
- HIGH QUALITY CONNECTIONS – RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
- CLASSIC HIFONICS LOOK – The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
How to Choose the Right 1200 Watt Amp
Before you make a purchase, it’s important to consider a number of factors to ensure that you’re getting the best 1200 watt amp for your needs and budget. Here are some things to think about before you buy:
Purpose: What do you need the product for? Make sure you have a clear understanding of how you’ll be using the product, so you can choose one that meets your needs.
Quality of the Product: Look for products that are well-made and built to last. Consider the materials used and the overall construction of the product.
Brand Reputation: Research the brand and read reviews from other customers to get an idea of the company’s reputation and the quality of its products.
Price: Determine your budget and look for products that offer good value for money. Don’t be swayed by low prices alone, as they may indicate lower quality.
Features: Consider the features of the product and how they align with your needs. Think about any additional features that may be useful to you.
Warranty and Return Policy: Look for products with a good warranty, as this can provide peace of mind and protect your investment. Also, be sure to check the return policy in case you need to return the product for any reason.
Size And Weight: If you’ll be carrying the product with you or storing it in a small space, make sure it’s the right size and weight for your needs.
By considering these factors, you can make an informed decision and choose a product that meets your needs and budget.
Conclusion
The last words of all, you must consider what value the product is providing against the price you are paying for. Does it make you satisfied or not? Do your demands be fulfilled with that?
Hope this article will come in handy for you to recognize and purchase the best 1200 watt amp in the market. Happy Shopping.