Are you on the hunt for the best all in one subwoofer? You have landed in the perfect place.
We have worked to save you the time and hassle of going through thousands of reviews. Do not fret if you are struggling to figure out the top all in one subwoofer in the market.
We have compiled an extensive list of the top all in one subwoofer for your convenience. Check out the list below!
Our In-Depth Reviews of Top 10 All In One Subwoofer
We have curated an extensive list of the top all in one subwoofer. Our team reviewed thousands of resources before putting any suggestions for the best all in one subwoofer in this article. So, check out the list below that’s found after long hours of research.
Rockville Ss8P 400W 8″ Slim Under-Seat
- Rockville SS8P 8″ 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
- RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
- Low Pass Filter: 50Hz – 150Hz. Bass Boost: 0 – 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
- Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4″ x 8.3″ x 2.8″ Inches. Frequency Response: 20Hz – 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
Pioneer Ts-Wx1210Am 12” 1300 Max Power With
- 1300 W Max Power (350 W Nominal) Pre-loaded 12″ Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
Rockville Ss8P 400 Watt Slim Under-Seat
- Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
- Rockville SS8P 8″ 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz – 150Hz. Bass Boost: 0 – 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A
- Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4″ x 8.3″ x 2.8″ Inches. Frequency Response: 20Hz – 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17′ 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3′ 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Rockford Fosgate P300-10 Punch Single 10″
- The Punch P300-10 is a self-contained all-in-one solution featuring a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier
- The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 13.3” x 18” x 8.9” x 5.9”
- Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control included
- Closed-loop design ensures optimum performance between woofer, amplifier and enclosure with easy integration in aftermarket or OEM audio systems using RCA or speaker level signals
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
Rockville Rws12Ca Slim 1200 Watt 12″
- Rockville Rws12ca slim 1200 Watt 12″ Amplified powered car Subwoofer Enclosure..Impedance: 4 ohm.Speaker size:12 inches
- 1200 watts peak power output. 300 watts RMS. 12″ Super slim subwoofer.
- Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
- High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
- Vented core magnet motor structure. 2″ High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
- Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.
- Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.
- Dimensions: 24″ Length x 15″ Height 4.37″ Top depth x 6.65″ Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.
- 150Mv – 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs.
- High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote.
Blaupunkt 300W 8-Inch Amplified Subwoofer
- 30W 8-Inch Amplified Subwoofer.Power source type:Corded Electric.Speaker size:8 inches
- Made with the highest technical quality to ensure maximum reliability and durability
- MAX power handling 300 watts (300 Watts Peak) and an RMS power handling of 120 watts (300 Watts Peak)
- Features variable bass boost, adjustable input sensitivity, and a low-pass filter
Rockville Rvb10.1A 10 Inch 500W Active
- Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
- Frequency Response: 35Hz – 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
- Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz – 160Hz).
- Accepts up to 8 Gauge Wire, 100mV – 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75″ x height: 12. 99″ x top width 10. 63″ x bottom width: 14. 17″, Weight: 22. 59 lbs.
Mb Quart Rw-108A 600W Reference Series
- MB Quart RW-108A 600W REFERENCE Series 8″ 4-Ohm Power Subwoofer Amplifier
- Complete control of amplifier signal, essential when using two or more amplifiers
- Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Stable power through the PC board with minimal heat generation
- Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
Cerwin-Vega Vpas10 10″ 2Ω 550W Max
- Power Handling: Peak: 550 watts RMS: 200 watts
- PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
- Delayed Soft Remote Turn On Adjustable Input Sensitivity
- Variable Bass Boost: 0 – +12 dB Variable Low-pass Filter: 85 – 150 Hz
- Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
- Fuse Rating: 25A x 1 Dimensions: 13.60″ L x 9.60″ W x 2.60″ H (approx)
8-Inch Carpeted Subwoofer Tube Speaker –
- 250 WATT POWER: The high powered audio projection carpeted subwoofer tube enclosure has a max power output of 250W so you can play your favorite tracks as loud as you want w/ style. Equipped w/ built-in high output amplifier & RCA/speaker line input
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill
- 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound
- BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8″ high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers
- 35Hz – 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle’s sound system
- One 8” High Power 4 Ohm Subwoofer – 1.5” Aluminum Voice Coil
- Built-In High Output Amplifier – Bass Reflex Vent for Added Sub-Bass Response
- Blue LED Light Behind The Grill – 250 Watts Max Power Handling
- Blue Polypropylene Cone – RCA/Speaker Line Input
- Specially Treated Black Rubber Edge Suspension – Dimensions:10.4″H x 20″W x 9.6″D
The Key Considerations for Choosing a All In One Subwoofer
There are many sources that’ll provide you with that information- buying guides or rating websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet, and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That’s why we’ve taken the time to compile a list of the best all in one subwoofer in today’s market, on your behalf. So that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
- First, we collected as much information available about these products from trusted sources.
- We employed some experts to validate all collected information.
- Then we ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best product currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because some renowned brands have a reputation to maintain, while others don’t.
Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top all in one subwoofer based on that.
Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
Customer Ratings: The hundreds of customers using the product before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the product they used.
Seller Rank: Now, this is interesting! You don’t just need a good product, you need a product that is trendy and growing in sales. It serves two objectives.
Firstly, the growing number of users indicates the product is good.
Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean a high price of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get before putting them on the list.
Durability: Durability and reliability go hand to hand. A robust and durable product will serve you for months and years to come.
Availability: Products come and go, and new products take the place of the old ones. Probably some new features were added, and some necessary modifications were done. What’s the point of using supposedly good products if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
Negative Ratings: Yes, we take that into consideration too! When we pick the top-rated products on the market, the products that got mostly negative ratings to get filtered and discarded.
These are the criteria we have chosen on. Does our process stop there? Heck, no!
The most important thing that you should know about us is, we’re always updating our website to provide timely and relevant information.
The Summary
In conclusion, finding the right product for your needs can be a challenging task, especially with so many options available. It is important to do thorough research and consider a variety of factors, such as price, features, durability, and overall quality.
Reading reviews and comparing different products can also be helpful in making an informed decision. Ultimately, the best all in one subwoofer for you will depend on your individual needs and preferences.
By keeping these things in mind and taking the time to carefully consider your options, you can be confident that you are making a wise purchase that will meet your needs and exceed your expectations.